The maintenance light in your Toyota is designed to alert you when something needs attention or maintenance. You may need to reset the light after performing certain maintenance tasks. Follow the instructions below to turn off the maintenance light on your Toyota.
Before you begin, make sure you have the right tools and supplies. You’ll need a flathead screwdriver and a paperclip.
To turn off the maintenance light on your Toyota:
- Locate the diagnostic link connector (DLC), which is typically located under the dashboard on the driver’s side of the vehicle.
- Using the flathead screwdriver, remove the cover of the DLC.
- Once the cover is removed, locate the two wires that are connected to the DLC. These wires are usually labeled “S” and “T”.
- Using the paperclip, connect the two wires together.
- Turn the ignition switch to the “on” position and wait for the maintenance light to turn off.
- Once the light is off, turn the ignition switch to the “off” position and remove the paperclip.
- Replace the cover of the DLC and you’re done.
If the maintenance light does not turn off after following the steps above, you may need to take your vehicle to a qualified technician to have them reset the light. The technician may need to run a diagnostic test to ensure that all of the components of your vehicle are working properly.
It is important to keep up with regular maintenance of your vehicle to ensure it is running safely and efficiently. If you notice that the maintenance light is on, follow the steps above to reset the light and then address any maintenance issues that may be causing the light to stay on.
- how to turn off iphone 13
- how to turn off xbox controller
- how to turn off youtube shorts
- how to turn off ps5
- how to turn off windows defender
- how to turn off iphone 12
- how to turn off ps5 controller
- how to turn off iphone 11
- how to turn off iphone 14
- how to turn off autocorrect
How to Reset Maintenance Required Light in a Toyota
How To Turn Off Maintenance Light On Toyota. Reset the maintenance required light in a Toyota after you change your oil so you know when to do your next oil change. This process works on most Toyotas including Camry, Tacoma, Corolla, Avalon, Tundra, Sienna, Rav4, 4Runner, and many more. Step 1: Turn the car to the "run" position and make sure the odometer is showing (some Toyota's need...
To reset the maintenance required light on a Toyota, follow these steps: Turn the vehicle on and make sure the odometer displays total miles and not the trip meter.
How To Reset Maintenance Light on Toyota Camry 2002-2020.
How To Turn Off Maintenance Light On Toyota. How To Reset Maintenance Light on Toyota Camry 2002 – 2019, I was told this method is working for Toyota Tacoma, Solara and Highlander as well. Please like and Subscribe. Toyota Camry Maintenance Light Reset Step by Step: easy as 1-2-3 if you need to read it. 1. Turn the ignition switch to the “On” position, but do not start the engine. If your car has START push-button , press the “Start” twice without touching the brake pedal. 2. Press...
2018 Toyota Corolla maintenance reset / oil light reset
How To Turn Off Maintenance Light On Toyota. How to reset maintenance system on 2018 Toyota Corolla LE
How To Reset Maintenance Required Light in Toyota Rav4 2013-2016
How To Turn Off Maintenance Light On Toyota. How To Reset Maintenance Light Toyota Rav4 2013 2014 2015 2016. This step by step guide to resetting maintenance light in Toyota rav4. Enjoy the Video? Support the channel by buying me a COFFEE to fuel my creativity ☕️ buymeacoffee.com/diysave519F
How To Turn Off Maintenance Light On Toyota. Take these steps on how to reset a Toyota maintenance light below: Put your key in the ignition and turn it to position one, the position just before starting the car. Push.